UPVC Door Lock Replacement
UPVC doors can be an excellent security measure against burglaries. However, they do have limitations that can be overcome by installing a deadlock.
It could be time to change the barrel lock if your uPVC door lock feels loose. This easy DIY project will enhance the security of your home as well as improve its appearance.
Removal of the old lock cylinder
If you're experiencing that your front door is fragile when you lock it, or that the key is struggling to turn, you could have a damaged lock cylinder. It will improve security and smooth operation by replacing it. The process is fairly simple and should take around 30 minutes. You'll need a screwdriver. Open your door and examine the edge of the door near the lock cylinder. There is an elongated screw in line with the bottom part of the cylinder. Remove it using an screwdriver, and then put it away in a safe location.
You will need to know the exact dimensions of your existing cylinder in order to find the right replacement. Typically, the sizes vary from 60mm to 110mm. To determine the exact size you'll need to find the screw on the faceplate of the lock and then remove it. You can also try to turn the lock handle with the key while the cylinder remains in place to see how much it shifts in each position.
Next, you'll need to measure the cylinder diameter and cylinder cam length. These measurements are essential for ensuring that your new lock will fit on the door you have. The dimensions of the lock can differ based on the type of uPVC. You'll need to select one that is identical or slightly bigger than the cylinder that is currently in use.
Once you have the measurements then it's time to take the old cylinder from the door. It's an easy task but you need to be careful to do it in a safe manner to avoid damaging your door frame or door. It is also important to ensure that the door is propped open or secured safely so that it doesn't close between steps.
If you don't wish to tackle it yourself, hiring a professional locksmith is a great option. They can provide expert advice, perfect execution, and peace of mind. They can also assist you in selecting a safe and secure lock system. DIY can be a good method to save money and gain new techniques. All you need is patience and the right tools like a Phillips screwdriver. It's not as difficult as you think to change the locks on your uPVC locks.
Installing the new lock cylinder
It is important to follow the right steps and make sure you use the correct measurements when replacing locks at your front door. This will not only prevent future issues, but it will also ensure your home is more secure and allow you use keys from both sides of the front door. It is important to measure the uPVC lock's overall length as well as the backset and cylinder size before replacing it. These measurements will ensure that the new lock cylinder fits within the uPVC frame and functions correctly without gaps or compromises in security.
The first step in the process is to unbolt the door handle by loosening the screws that hold it using the help of a screwdriver. The next step is to take off the barrel screw that is holding the cylinder lock. After that, you can remove the lock cylinder that was previously in place by inserting a lock key into the cylinder and turning it to the left and the right. You can remove the cylinder with the key if it is in one of these positions.
Installing the new cylinder in the front door is easy and will require the same steps that you took to remove the old one. However, you should note that the cylinder will not fit in the area where the previous one was. This is because the cylinder needs to be properly aligned to allow it to be locked and closed using a key. To achieve this, make sure that the cylinder has an elongated keyway and is located in its slot.
It isn't difficult to install a new uPVC door lock, however it is important to be careful not to harm the door's frames or handles. If you are unsure about your abilities to complete this project, hire an expert who is certified by Checkatrade and has experience with these types of door. Locksmiths can save you time and money by completing the task quickly.
Attaching the door handle
There are many reasons you might want to upgrade the lock on your front door. You may have lost the lock key, the previous tenant has not returned the keys, or you wish to upgrade to a more secure lock. It takes only five minutes to change the barrel on a lock of an uPVC front door. You will need a Phillips-head screwdriver, a new cylinder of the lock and a spare key (if you plan to use one). Make sure that the door is propped open or secured safely to ensure that it doesn't shut during the process.
It's not as difficult as you think to replace the lock mechanism on a uPVC door. Begin by determining what replace upvc door lock mechanism of lock is installed on your front door, determine the size you need to replace it. For older doors, there are strip locks as well as multipoint locks. It is easier to replace your uPVC door lock if you know what brand and type it is.
After replacing the cylinder you will need to reconnect the handle. To begin, you'll be required to loosen the set screw on the spindle shaft of the handle with the aid of a screwdriver. This will let you take the handle off and expose the shaft of the spindle. If the shaft is threaded you will need to loosen a little and back it up a bit with a screwdriver in order to ensure that it is properly fitted.
After you've tightened the screws on the new handle and the lock cylinder, it's time to test the lock. Verify that the key is turning easily and fits well and that the locking mechanism of the handle is operating correctly. If you're not comfortable doing this on your own A locksmith can complete the job for you.
Remember that uPVC lock mechanisms and door handles require regular lubrication to function properly. This is especially relevant in areas with high wear and tear, such as those that are used frequently or shut and locked. A little bit of lubricant goes in a great way to ensure that they function correctly and will extend their lifespan.
Test the new lock
A door lock made of upvc is an essential element of your home's security. Like every other device, it can wear out over time or become compromised. The key to a well-functioning uPVC lock is regular maintenance. This will prevent problems from happening and could compromise your home's security. The best method to achieve this is by lubricating the internal mechanisms with an approved fluid every six months. This will keep the lock running smoothly and stop it from rusting or becoming damaged.
In addition to the normal lubrication, you can also make use of a silicon-based spray loosen the keyway and make it easier to insert the key. This is a straightforward DIY fix that can save you money in the long run. It is recommended to avoid using WD-40 since it can leave a greasy residue that could harm the lock.
It is important to test the new cylinder after installation before you can be sure that it will function correctly. You can test this by testing the handle from inside and outside the door. Then, put the handles back in place and re-insert spindle screws to ensure everything is in place. Finally, re-insert the screws that were holding them in place and give yourself a pat on the back for a job done well!
If you are looking to improve the security of your home Locksmiths can install additional features, such as door chains or sash jammers. They can even help you choose the best locks for your home. A professional can assist you in determining the size of the lock that is best for your doors. This is vital, as a mismatched lock could compromise your security.
The cost of replacing a uPVC lock can vary depending on the type of lock and the number of doors that have to be replaced. The average cost for a professional locksmith is between PS75 and PS100 per hour. However, the price can change depending on where you live and what type of lock you require. Compare locksmith prices before choosing a firm.